Tekelec IP7 Secure Gateway Administration Manual page 162

Database Administration Manual - IP7 Secure
Gateway
3. Display the LSRESTRICT option value by entering the rtrv-ss7opts command.
This is an example of the possible output.
rlghncxa03w 10-07-30 15:09:00 GMT
SS7 OPTIONS
-----------------------
LSRESTRICT
Note: The rtrv-feat command output contains other fields that are not used by this procedure.
If you wish to see all the fields displayed by the rtrv-feat command, refer to the rtrv-feat
command description in the Commands Manual.
The signaling link cannot be removed, if the LSRESTRICT option is on and the number of signaling
links assigned to the linkset will be less than the value of the tfatcabmlq parameter value of the
linkset if the signaling link is removed.
If the LSRESTRICT option is on and the number of signaling links assigned to the linkset will be
equal to or greater than the value of the tfatcabmlq parameter value of the linkset if the signaling
link is removed, continue the procedure with
If the LSRESTRICT option is on and the number of signaling links assigned to the linkset will be
less than the value of the tfatcabmlq parameter value of the linkset if the signaling link is removed,
the signaling link cannot be removed unless the tfatcabmlq parameter value of the linkset is
changed to 0. Continue the procedure with
If the LSRESTRICT value is off, continue the procedure with
4. Change the tfatcabmlq parameter value of the linkset to 0 by entering the chg-ls command
with the name of the linkset that contains the signaling link that is being removed and the
tfatcabmlq parameters. For this example, enter this command.
chg-ls:lsn=ls17:tfatcabmlq=0
When this command has successfully completed, this message should appear.
rlghncxa03w 10-07-07 08:41:12 GMT
Link set table is (20 of 1024) 2% full.
CHG-LS: MASP A - COMPLTD
5. Display the IP link associated with the card that the signaling link being removed the database is
assigned to.
Enter the rtrv-ip-lnk command with the card location of the signaling link being removed
shown in Step
rtrv-ip-lnk:loc=2205
The following is an example of the possible output.
rlghncxa03w 06-10-28 21:14:37 GMT EAGLE5 36.0.0
LOC PORT IPADDR
2205 A 192.3.1.10
2205 B --------------- --------------- HALF
rtrv-ip-lnk:loc=2204
910-6278-001 Revision A, January 2012
on
1. For this example, enter these commands.
SUBMASK
255.255.255.128 HALF
IETF M2PA Configuration Procedures
42.0.0
Step 5.
Step 4.
Step
EAGLE5 42.0.0
DUPLEX SPEED MACTYPE AUTO MCAST
10
10
5.
802.3 NO NO
DIX NO NO
162