Tekelec IP7 Secure Gateway Administration Manual page 915

Database Administration Manual - IP7 Secure
Gateway
From
Sheets 1, 2,
3, or 4
IPSG M3UA
Enter the chg-ls command with
these mandatory parameters.
:lsn=<the name of the linkset>
and with any of these optional
parameters.
:rsvdslktps = <100
:maxslktps = <0
:tpsalmtype= <rsvdslktps,
maxslktps>
:asnotif=<yes, no>
:lsusealm = <10
:slkusealm = <10
See the Notes.
Enter the rtrv-ls command
with this parameter.
:lsn=<linkset name specified
in the chg-ls command>
Enter the
chg-db:action=backup:dest=fixed
command.
Notes:
1. The maxslktps parameter value must be greater than or
equal to the rsvdslktps parameter value.
2. The slktps parameter can be used in place of the rsvdslktps
parameter.
3. There are other optional parameters that can be specified
with the chg-ls command. See the Other Optional Parameters"
section in the Changing an IPSG M3UA Linkset" Procedure in
the Database Administration Manual
the procedures that discuss these parameters and their usage.
Sheet 5 of 8
910-6278-001 Revision A, January 2012
Do you wish
to change the ASNOTIF,
LSUSEALM, SLKUSEALM
values for the linkset?
Yes
What type
of linkset was
Linkset
selected when this
procedure was
started?
5000>
5000>
100>
100>
Do you wish to
No
change the RCONTEXT
value for the linkset?
IP7 Secure Gateway for
IPSG M2PA and M3UA Configuration Procedures
No
IPSG M2PA
Linkset
Enter the chg-ls command with these
mandatory parameters.
:lsn=<the name of the linkset>
:adapter=m3ua
and any of these optional parameters .
:rsvdslktps = <100 5000>
:maxslktps = <0 5000>
:tpsalmtype= <rsvdslktps, maxslktps>
:asnotif=yes
:lsusealm = <10 100>
:slkusealm = <10 100>
See the Notes.
Yes
What type
IPSG M2PA
of linkset was
Linkset
selected when this
procedure was
started?
IPSG M3UA
Linkset
This procedure is
finished.
To
Sheet 6
Perform the Adding an
IPSG M3UA Signaling Link"
procedure to add IPSG
M3UA signaling links to this
linkset.
915