Tekelec IP7 Secure Gateway Administration Manual page 539

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 2
Is the new bufsize
value greater than or equal to
the cwmin parameter value?
Enter the chg-assoc command with these
:aname=<name of the association being
:bufsize=<8
Was the value of
the open parameter
changed on Sheet 1?
Note: The bufsize value must be greater than or equal to
the cwmin value.
The cwmin value is the number of bytes specified for the
size of the association's congestion window. The bufsize
value is the number of kilobytes specified for the size of
the association's buffer .
To determine whether or not the bufsize value is greater
than or equal to the cwmin value, perform one of these
actions:
Multiply the bufsize value by 1024
Divide the cwmin value by 1024.
Sheet 3 of 4
910-6278-001 Revision A, January 2012
No
(See the Note)
Yes
parameters:
changed>
400>
Yes
No
IETF M3UA and SUA Configuration Procedures
Either choose another value for
the bufsize parameter that is
greater than or equal to the
cwmin value, or change the
cwmin value by performing the
Changing the Attributes of an
M3UA or SUA Association"
procedure.
Enter the chg-assoc
command with these
parameters.
:aname=<association
name being changed>
:open=yes
Enter the rtrv-assoc
command with this
parameter.
:aname=<association
name specified with the
chg-assoc command>
Enter the
chg-db:action=backup:dest=fixed
command
Sheet 4
To
539