Tekelec IP7 Secure Gateway Administration Manual page 777

Database Administration Manual - IP7 Secure
Gateway
RCONTEXT
none
LOC
1317 A
Link set table is (13 of 1024) 1% full.
If the IPSG value of the linkset is no, choose another linkset and repeat this procedure from
5.
If the IPSG value of the linkset is yes and the ADAPTER value is m2pa, choose another linkset and
repeat this procedure from
If the IPSG value of the linkset is yes, and the ADAPTER value is m3ua, continue the procedure by
performing one of these actions.
If a new IPSG card was added in
If the signaling link will be assigned to an existing IPSG card, the RSVDSLKTPS value that is
assigned to the linkset will be assigned to the signaling link. The sum of the TPS used by all the
signaling links that are assigned to the IPSG card cannot exceed 5000 TPS. The TPS used by the
IPSG card and the TPS used by each signaling link that is assigned to the IPSG card is shown
by entering the rtrv-slk command with the location of the IPSG card. If the 5000 TPS limit
for the IPSG card will be exceeded by adding the IPSG M2PA signaling link, one of these actions
must be performed.
Another IPSG card must be used for the IPSG M2PA signaling link. Repeat this procedure
from Step
The RSVDSLKTPS values for the linksets shown in the rtrv-slk output for the IPSG card,
shown in
Perform these procedures as necessary to change the RSVDSLKTPS values for the linksets.
After the linksets have been changed, continue the procedure with
Changing an IPSG M3UA Linkset
Changing an IPSG M2PA Linkset
7. Display the total provisioned system TPS by entering the rtrv-tps command. This is an example
of the possible output.
rlghncxa03w 10-07-10 16:20:46 GMT
CARD NUM
TYPE CARDS
----- -----
IPGW 17
IPSG 4
IPLIM 2
ATM 2
Total provisioned System TPS (103668 of 500000) 21%
Command Completed.
An IPSG M3UA signaling link uses can use as much as 5000 TPS, as provisioned by the rsvdslktps
parameter of the linkset that the IPSG M3UA signaling link will be added to. If adding the new
IPSG M3UA signaling link will not exceed the maximum total provisioned system TPS, continue
the procedure with
910-6278-001 Revision A, January 2012
ASNOTIF
yes
LINK SLC TYPE
0 IPSG
Step 5.
Step
3.
Step 4, must be reduced enough to allow the IPSG M2PA linkset to be added.
NUM RSVD
LINKS TPS
----- -------- --------
16 48000
8 4700
4 8000
2 3668
Step 11.
IPSG M2PA and M3UA Configuration Procedures
NUMSLKALW NUMSLKRSTR
1 1
ANAME
m3ua20
3, continue the procedure with
EAGLE 42.0.0
MAX
TPS
80000
12000
8000
3668
NUMSLKPROH
1
Step
Step 7.
Step 7.
777