Tekelec IP7 Secure Gateway Administration Manual page 844

Ip7 secure gateway
Table of Contents

Advertisement

Database Administration Manual - IP7 Secure
Gateway
This is an example of the possible output.
rlghncxa03w 06-10-23 13:06:25 GMT EAGLE5 36.0.0
SLK
LSN
2204,A
ls04
ALARM STATUS
UNAVAIL REASON
9. If the signaling link to be removed is the last signaling link on a card, the card must be inhibited
before the signaling link is removed.
Note: If the signaling link being removed is not the last signaling link on the card, continue the
procedure with
Enter the rmv-card command and specify the location of the card to be inhibited. The card location
is shown in the output of rept-stat-slk command executed in
In the example used for this procedure, the signaling link is the last signaling link on the card and
must be inhibited. Enter this command.
rmv-card:loc=2204
When each of these command has successfully completed, this message should appear.
rlghncxa03w 06-10-07 08:41:12 GMT
Card has been inhibited.
10. Verify that the card has been inhibited by entering the rept-stat-card command with the card
location specified in
rept-stat-card:loc=2204
This is an example of the possible output.
rlghncxa03w 10-12-01 09:12:36 GMT EAGLE5 43.0.0
CARD
VERSION
2204
133-003-000
ALARM STATUS
BLIXP
GPL version = 133-003-000
IMT BUS A
IMT BUS B
CURRENT TEMPERATURE
PEAK TEMPERATURE:
SIGNALING LINK STATUS
SLK
A
Command Completed.
11. Display the linkset that contains the signaling link that is being removed by entering the rtrv-ls
command with the name of the linkset shown in the LSN column in
this command.
rtrv-ls:lsn=ls04
This is an example of the possible output.
rlghncxa03w 08-05-27 16:43:42 GMT EAGLE5 38.0.0
LSN
ls04
910-6278-001 Revision A, January 2012
CLLI
PST
ls04clli
OOS-MT
= *
0235 REPT-LNK-MGTINH: local inhibited
= LI
Step
11.
Step
9. For this example, enter this command.
TYPE
GPL
E5ENET
IPSG
=
No Alarms.
= Disc
= Disc
=
32C ( 90F)
=
39C (103F)
PST
OOS-MT
APCA
(SS7)
SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS
001-001-003
none 1
IPSG M2PA and M3UA Configuration Procedures
SST
Unavail
EAGLE5 36.0.0
PST
OOS-MT-DSBLD
[ALARM TEMP:
[06-05-02 13:40]
LS
CLLI
lsnlp2
-----------
L3T SLT
1
no
A
1
AST
----
Step
8.
SST
AST
Isolated
-----
60C (140F)]
Step
10. For this example, enter
GWS GWS GWS
off off off no
off
844

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Eagle

Table of Contents