Tekelec IP7 Secure Gateway Administration Manual page 532

Database Administration Manual - IP7 Secure
Gateway
When this command has successfully completed, this message should appear.
rlghncxa03w 08-04-28 09:12:36 GMT EAGLE5 38.0.0
CHG-ASSOC: MASP A - COMPLTD;
4. Display the association being changed by entering the rtrv-assoc command with the aname
parameter specified in
For this example, enter this command.
rtrv-assoc:aname=assoc2
This is an example of the possible output.
rlghncxa03w 09-05-28 21:14:37 GMT EAGLE5 41.0.0
ANAME assoc2
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
ASNAMES
as1
IP Appl Sock/Assoc table is (8 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 800 KB) on LOC = 1205
5. If the bufsize parameter value causes the total buffer size for all the associations on the IP card
to exceed the maximum buffer size for that IP card, the chg-assoc command will be rejected.
If you wish to increase the buffer size for this association to a value that is greater than available
buffer size for the card, the buffer size of the other associations assigned to the card must be
decreased. Perform this step and
If the buffers on the other associations assigned to the card do not need to be changed, continue
the procedure with
Display the associations assigned to the IP card (and its corresponding local host) by entering the
rtrv-assoc command with the local host name assigned to the association being changed. For
this example, enter this command.
rtrv-assoc:lhost="IPNODE2-1205"
This is an example of the possible output.
rlghncxa03w 08-04-28 21:14:37 GMT EAGLE5 38.0.0
ANAME
assoc2
assoc3
assoc5
IP Appl Sock/Assoc table is (8 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 3200 KB) on LOC = 1205
910-6278-001 Revision A, January 2012
Step 3 or the association selected in
1205 IPLNK PORT
M3UA VER
IPNODE2-1205
---
remotehost1
---
2048 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
No ALW
as4
Step 6, Step
Step 9.
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1205 A A M3UA
1205 A A M3UA
1205 A A M3UA
IETF M3UA and SUA Configuration Procedures
Step 1.
A LINK
M3UA RFC
2048
2 BUFSIZE
120 RMAX
3000 UAPS
YES RTXTHR
as6
7, and Step 8.
2048 2048 YES
3000 3000 YES
1500 3000 YES
A
200
800
10
2000
YES
YES
YES
532