Tekelec IP7 Secure Gateway Administration Manual page 887

Database Administration Manual - IP7 Secure
Gateway
TPSALM
rsvdslktps 100%
LOC
1303 A
1303 A1
1303 B1
1303 A2
1303 A3
1307 A
Link set table is (8 of 1024) 1% full.
rtrv-ls:lsn=ipsglsn2
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0
LSN
ipsglsn2
---------------- -----------
RANDSLS
off
IPSG
yes
ADAPTER
m2pa
TPSALM
rsvdslktps 100%
LOC
1303 B3
Link set table is (8 of 1024) 1% full.
Perform these actions as necessary.
Perform the
shown in the rtrv-ls output whose IPGWAPC value is yes.
Perform one of these actions to change the MAXSLKTPS value (and RSVDSLKTPS value if
necessary) for any linksets shown in the rtrv-ls output whose IPSG value is yes.
If the ADAPTER value of the linkset is M3UA, perform the
procedure.
If the ADAPTER value of the linkset is M2PA, continue the procedure with
Perform one or both of these actions to increase the available TPS if needed.
An IPLIMx card that contains signaling links has to be removed. To perform this action, continue
the procedure with
910-6278-001 Revision A, January 2012
LSUSEALM
LINK SLC TYPE
0 IPSG
1 IPSG
2 IPSG
3 IPSG
4 IPSG
5 IPSG
APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS
005-005-005 none 1
SPCA CLLI
IPGWAPC GTTMODE
no CdPA
RSVDSLKTPS
600
LSUSEALM
LINK SLC TYPE
0 IPSG
Configuring an IPGWx Linkset
Step 7.
IPSG M2PA and M3UA Configuration Procedures
SLKUSEALM
100%
ANAME
ipsgm2pa1
ipsgm2pa2
ipsgm2pa3
ipsgm2pa4
ipsgm2pa5
m2pa2
L3T SLT
1 no A 1
TFATCABMLQ MTPRSE ASL8
1
CGGTMOD
no
MAXSLKTPS
4000
SLKUSEALM
100%
ANAME
ipsgm2pa6
procedure to change the IPTPS value for any linksets
GWS GWS GWS
off off off no
--- no
Changing an IPSG M3UA Linkset
Step 10.
off
887