Tekelec IP7 Secure Gateway Administration Manual page 522

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
Select an association to
change whose adapter value
is M3UA or SUA.
Does the card
containing the association that
will be changed, contain any
SUA associations?
Enter the rtrv-card command
with this parameter:
:loc = <the location of the card containing
the association that will be changed,
whose adapter value is M3UA, shown in
the rtrv-assoc output>
application is assigned
Perform the "Changing the
Attributes of an IPSG
Association" procedure in
Chapter 6 to change the
attributes of the association.
Sheet 1 of 8
910-6278-001 Revision A, January 2012
command
Yes
No
Is the IPSG
No
to the card?
Yes
IETF M3UA and SUA Configuration Procedures
To
Sheet 2
522