Tekelec IP7 Secure Gateway Administration Manual page 911

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-ls
command.
Enter the rtrv-ls command
with this parameter.
:lsn=<the name of the
linkset>
Do you wish
No
to change this
linkset?
What is the
M2PA
ADAPTER value of
the linkset?
signaling links shown in
the linkset?
Perform these procedures as
required to remove the
signaling links from the
linkset.
Removing an SS7 Signaling
Link"
Removing an IPLIMx
Signaling Link"
Removing an IPSG M2PA
Signaling Link"
Sheet 1 of 8
910-6278-001 Revision A, January 2012
What is
the IPGWAPC
value?
Yes
What is
the LST value of the
linkset?
Yes
What is the
IPSG value?
M3UA
Are
No
the LST value of the
Yes
IPSG M2PA and M3UA Configuration Procedures
Perform the Removing a
Linkset Containing SS7
No
procedure to remove the
Yes
Perform the Adding an
PRX
Perform the Adding an
A, B, C,
D, E
No
Enter the chg-ls
B, C,
command with these
What is
D, E
parameters.
:lsn=<the name of the
linkset?
A
Do you wish to
change the MAXSLKTPS
or RSVDSLKTPS values
for the linkset?
To
Sheet 5
Signaling Links"
linkset.
IPSG M3UA Linkset"
procedure to add the
IPSG M3UA linkset.
IPSG M3UA Signaling
Link" procedure to add
IPSG M3UA signaling
links to this linkset.
linkset>
:lst=a
Yes
No
To
Sheet 2
911