Figure 65: Removing An Association From An Application Server - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
Enter the dlt-as command with
:asname = <application server name
containing the association being removed>
:aname = <association name being
removed from the application server>
Note: If the association being removed is
the only association assigned to the
application server, the application server is
removed from the database.
Enter the rtrv-as command
:asname=<application server
name specified in the dlt-as
Sheet 2 of 2

Figure 65: Removing an Association from an Application Server

910-6278-001 Revision A, January 2012
From
Sheet 1
these parameters:
with this parameter:
command>
Was the value of
Yes
the open parameter
changed?
No
IETF M3UA and SUA Configuration Procedures
Enter the
chg-assoc command with these
parameters:
:aname=<association name that
was changed on Sheet 1>
:open=yes
Enter the
chg-db:action=backup:dest=fixed
command
496