Tekelec IP7 Secure Gateway Administration Manual page 721

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
Is the defrouter
parameter to be specified
with the chg-ip-card
command?
Enter the
rtrv-ip-lnk command with this
parameter:
:loc=<location of the IP card>
Choose a value for the
defrouter parameter so that the
network portion of the defrouter
parameter value matches one
of the IP addresses shown in
the rtrv-ip-lnk output.
Sheet 2 of 4
910-6278-001 Revision A, January 2012
Enter the
rept-stat-card:loc=<card
location> command
rept-stat-card:loc=<card
No
Yes
portion of the defrouter value
and any of the IP addresses
shown in the rtrv-ip-lnk output
No
addresses shown in the
IPSG M2PA and M3UA Configuration Procedures
Is the state of
the card
OOS-MT-DSBLD?
Yes
Enter the
location> command
Does the network
Yes
match?
No
Do you wish to
Yes
change any of the IP
rtrv-ip-lnk output?
Perform the "Configuring an IP Link"
procedure in this chapter to change
one of the IP addresses shown in the
To rtrv-ip-lnk output so that the network
Sheet 3 portion of the defrouter parameter
value matches one of the IP
addresses shown in the rtrv-ip-lnk
No
Enter the
inh-card:loc=<card
location> command
To
Sheet 3
output.
721