Database Administration Manual - IP7 Secure
Gateway
IP Appl Sock/Assoc table is (8 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 800 KB) on LOC = 1205
Continue the procedure by performing one of these steps.
If only the rtxthr parameter value is being changed, continue the procedure with
If the adapter, uaps, or cwmin parameter values are not being changed, continue the procedure
with
Step 10
If the adapter parameter value is being changed, continue the procedure with
If the uaps parameter value is being changed, but the adapter parameter value is not being
changed, continue the procedure with
If the cwmin parameter value is being changed, but the adapter and uaps parameter values
are not being changed, continue the procedure with
7. Display the application servers referencing the association being changed using the rtrv-as
command with the name of the association being changed in this procedure.
For this example, enter this command.
rtrv-as:aname=assoc2
This is an example of possible output.
rlghncxa03w 08-04-28 21:14:37 GMT EAGLE5 38.0.0
AS Name
as1
as4
as6
AS Table is (6 of 250) 1% full
If the association is assigned to any application servers, perform
Application Server
Continue the procedure by performing one of these steps.
If the uaps or cwmin parameter values are not being changed, continue the procedure with
Step 10
.
If the uaps parameter value is being changed, continue the procedure with
If the cwmin parameter value is being changed, but the uaps parameter value is not being
changed, continue the procedure with
8. Verify the values of the UA parameter set you wish to assign to the association by entering the
rtrv-uaps command with the desired parameter set.
Note: If the uaps parameter will not be specified with the chg-assoc command, and the adapter
parameter value is being changed to either m3ua or sua, the UA parameter set 10 will be assigned
to the association.
For this example, enter this command.
rtrv-uaps:set=3
This is an example of possible output.
rlghncxa03w 10-07-28 09:12:36 GMT EAGLE5 42.0.0
SET
TIMER
910-6278-001 Revision A, January 2012
.
Mode
Tr ms
LOADSHARE
2000
LOADSHARE
2000
LOADSHARE
2000
to remove the association from the application servers.
TVALUE
PARM
IETF M3UA and SUA Configuration Procedures
Step
8.
Step
9.
Association Names
assoc2
assoc2
assoc2
Step
9.
PVALUE
Step
Step
Removing an Association from an
Step
8.
12.
7.
517
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers