Database Administration Manual - IP7 Secure
Gateway
3. Change the value of the open parameter to no by specifying the chg-assoc command with the
open=no parameter.
For this example, enter this command.
chg-assoc:aname=assoc2:open=no
When this command has successfully completed, this message should appear.
rlghncxa03w 08-04-28 09:12:36 GMT EAGLE5 38.0.0
CHG-ASSOC: MASP A - COMPLTD;
4. Display the association being changed by entering the rtrv-assoc command with the aname
parameter specified in
For this example, enter this command.
rtrv-assoc:aname=assoc2
This is an example of the possible output.
rlghncxa03w 09-05-28 21:14:37 GMT EAGLE5 41.0.0
ANAME assoc2
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
ASNAMES
as1
IP Appl Sock/Assoc table is (8 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 800 KB) on LOC = 1205
If the association shown in this step is an M2PA association, continue the procedure with
If the association shown in this step is an M3UA or SUA association, perform one of these actions.
If the association does not have an ALHOST value, continue the procedure with
If the association does have an ALHOST value, and the ALHOST value will be removed along
with changing the LHOST value of the association, continue the procedure with
If the association does have an ALHOST value, and the only action that will be performed in this
procedure is to remove the ALHOST value from the association, continue the procedure with
Step
12.
5. Verify that the local host name to be assigned to the association is in the database by using the
rtrv-ip-host:display=all command.
The following is an example of the possible output.
rlghncxa03w 08-12-28 21:15:37 GMT EAGLE5 40.0.0
LOCAL IPADDR
910-6278-001 Revision A, January 2012
Step 3
or the association selected in
1205
IPLNK PORT
M3UA
VER
IPNODE2-1205
---
remotehost1
---
2048
RPORT
2
OSTRMS
LIN
RMIN
10
CWMIN
No
ALW
as4
LOCAL HOST
IETF M3UA and SUA Configuration Procedures
Step
1.
A
LINK
M3UA RFC
2048
2
BUFSIZE
120
RMAX
3000
UAPS
YES
RTXTHR
as6
A
200
800
10
2000
Step
5.
Step
5.
Step
5.
544
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers