Tekelec IP7 Secure Gateway Administration Manual page 537

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command
Select an association to
change whose adapter value
is M3UA or SUA.
Does the card
containing the association that
will be changed, contain any
SUA associations?
No
Enter the rtrv-card command
with this parameter:
:loc = <the location of the card containing
the association that will be changed,
whose adapter value is M3UA, shown in
the rtrv-assoc output>
Is the IPSG
application is assigned
to the card?
Perform the "Changing the
Buffer Size of an IPSG
Association" procedure in
Chapter 14 to change the
attributes of the association.
Sheet 1 of 4
910-6278-001 Revision A, January 2012
Yes
What is the
No
value of the open
parameter?
Yes
Enter the chg-assoc command
with these parameters.
:aname=<name of the
association being changed>
:open=no
IETF M3UA and SUA Configuration Procedures
No
Yes
Enter the rtrv-assoc command
with this parameter:
:aname=<name of the
association being changed>
To
Sheet 2
537