Tekelec IP7 Secure Gateway Administration Manual page 720

Database Administration Manual - IP7 Secure
Gateway
These messages should appear, the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Enter the
rtrv-ip-card command
Enter the
rtrv-slk:loc=<card location of the
signaling link from rtrv-ip-card
output> command
Enter the
rept-stat-slk:loc=<card location
of the signaling link>
:link=<signaling link assigned
to the card> command
Is the state of
the signaling link
OOS-MT-DSBLD?
Enter the
dact-slk:loc=<card location of
the signaling link>
:link=<signaling link assigned
to the card> command
Enter the
rept-stat-slk:loc=<card
location of the signaling link>
:link=<signaling link assigned
to the card> command
Sheet 1 of 4
910-6278-001 Revision A, January 2012
Yes
No
To
Sheet 2
IPSG M2PA and M3UA Configuration Procedures
720