Figure 116: Changing An Ipsg M3Ua Linkset - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
Enter the chg-ls command with
these parameters.
:lsn=<the name of the linkset>
:rcontext=<0 - 4294967295>
Enter the rtrv-ls command
with this parameter.
:lsn=<linkset name specified
in the chg-ls command>
Are signaling
links assigned to the
linkset that was
act-slk command with these
:loc=<IPSG card location>
:link=<link value for the signaling link in
Repeat this step for each signaling link
that was deactivated on this sheet.
chg-db:action=backup:dest=fixed
Sheet 8 of 8

Figure 116: Changing an IPSG M3UA Linkset

910-6278-001 Revision A, January 2012
What type
of linkset was
From
selected when this
Sheet 6
procedure was
started?
Perform the Adding an
IPSG M3UA Signaling Link"
No
procedure to add IPSG
M3UA signaling links to this
changed?
Yes
Enter the
parameters.
the linkset>
Enter the
command.
IPSG M2PA and M3UA Configuration Procedures
IPSG M2PA
Linkset
IPSG M3UA
Was the
Linkset
adapter=m3ua
Yes
parameter specified with
the chg-ls command on
Sheet 5?
Enter the chg-ls command with
this parameter.
:lsn=<the name of the linkset>
:adapter=m3ua
linkset.
No
918