Chapter 6: Ipsg M2Pa And M3Ua Configuration Procedures - Tekelec IP7 Secure Gateway Administration Manual

IPSG M2PA and M3UA Configuration Procedures
Topics:
Adding IPSG Components.....643
Adding an IPSG Card.....644
Adding an IPSG M2PA Linkset.....652
Adding an IPSG M3UA Linkset.....671
Configuring an IP Link.....691
Adding an IP Host.....710
Configuring an IP Card.....713
Adding an IP Route.....724
Adding an IPSG M2PA Association.....730
Adding an IPSG M3UA Association.....743
Adding an IPSG M2PA Signaling Link.....751
Adding an IPSG M3UA Signaling Link.....771
Adding a Network Appearance.....795
Activating the Large MSU Support for IP
Signaling Feature.....801
Removing IPSG Components.....809
Removing an IPSG Card.....809
Removing an IPSG Linkset.....812
Removing an IP Host Assigned to an IPSG
Card.....826
Removing an IP Route.....831
Removing an IPSG Association.....834
Removing an IPSG M2PA Signaling Link.....840
Removing an IPSG M3UA Signaling Link.....848
Removing a Network Appearance.....856
Changing IPSG Components.....858
Changing an IPLIMx Card to an IPSG Card...858
Configuring IP Options.....870
Configuring IPSG M3UA Linkset Options.....873
Changing an IPSG M2PA Linkset.....878
Changing an IPSG M3UA Linkset.....895
910-6278-001 Revision A, January 2012
Chapter 6, IPSG M2PA and M3UA Configuration
Procedures, describes the procedures necessary to
configure the components necessary to establish IP
connections using M2PA or M3UA associations on
IPSG signaling links.
Chapter
6
641