Database Administration Manual - IP7 Secure
Gateway
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 6400 KB) on LOC = 1205
rtrv-assoc:aname=assoc1
This is an example of the possible output.
rlghncxa03w 09-05-28 21:14:37 GMT EAGLE5 41.0.0
ANAME assoc1
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL MATCH
LSN
ipsgm3ua1
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (200 KB of 6400 KB) on LOC = 1201
13. Back up the new changes, using the chg-db:action=backup:dest=fixed command.
These messages should appear; the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change the lhost, alhost, or bufsize values of the IPSG association, perform
one of these procedures.
lhost and alhost -
bufsize -
If you do not wish to change the lhost, alhost, bufsize, or link values of the IPSG association,
this procedure is finished.
910-6278-001 Revision A, January 2012
1201
IPLNK PORT A
M3UA
VER
m3ua1
---
remote1
---
2000
RPORT
2
OSTRMS
LIN
RMIN
10
CWMIN
YES
ALW
Changing the Host Values of an IPSG Association
Changing the Buffer Size of an IPSG Association
IPSG M2PA and M3UA Configuration Procedures
LINK
M3UA RFC
3000
2
BUFSIZE
120
RMAX
3000
UAPS
NO
RTXTHR
A
200
800
3
10000
931
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers