Tekelec IP7 Secure Gateway Administration Manual page 933

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
:aname=<name of the association
chg-db:action=backup:dest=fixed
Sheet 2 of 5
910-6278-001 Revision A, January 2012
Is the rtxthr
No
parameter value being
changed?
Yes
Enter the
rtrv-assoc command with this
parameter.
name being changed>
Enter the
command.
Do you wish
Yes
to change the LHOST or
ALHOST values of the
IPSG association?
No
Do you wish to
No
change the buffer size
of the IPSG
association?
Yes
Perform the Changing the
Buffer Size of an IPSG
Association" procedure in
this chapter.
IPSG M2PA and M3UA Configuration Procedures
Note: If the adapter
parameter value for the
association is M3UA, the
alw parameter cannot be
specified.
Enter the chg-assoc with this
mandatory parameter:
:aname=<name of the association
being changed>
and with at least one of these optional
parameters.
:alw = <yes, no> (See the Note)
:open = <yes, no>
:rtxthr = < 0 65535>
Enter the
rtrv-assoc command with
this parameter.
:aname=<association
name specified with the
chg-assoc command>
Perform the Changing the
Host Values of an IPSG
Association" procedure in
this chapter.
This procedure is
finished.
933