Tekelec IP7 Secure Gateway Administration Manual page 521

Database Administration Manual - IP7 Secure
Gateway
Note: If the Removing an Association from an Application Server
continue the procedure with
15. Assign the association changed in
of these procedures:
Adding an Existing Association to a New Application Server
Adding an Existing Association to an Existing Application Server
16. Back up the new changes, using the chg-db:action=backup:dest=fixed command. These
messages should appear; the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change the lhost, alhost, or bufsize values of the M3UA or SUA association,
perform one of these procedures.
lhost and alhost -
bufsize -
If you do not wish to change the lhost, alhost, or bufsize values of the M3UA or SUA
association, this procedure is finished.
910-6278-001 Revision A, January 2012
Step 16.
Step 12
Changing the Host Values of a M3UA or SUA Association
Changing the Buffer Size of a M3UA or SUA Association
IETF M3UA and SUA Configuration Procedures
procedure in
to all applicable application servers by performing one
Step 7 was not performed,
521