Tekelec IP7 Secure Gateway Administration Manual page 313

Database Administration Manual - IP7 Secure
Gateway
Sheet 2 of 6
910-6278-001 Revision A, January 2012
From
Sheet 1
Enter the rtrv-ls command
Choose another
linkset from the
rept-stat-iptps output
Yes
Do you
wish to use another
No
IPGWx linkset from the
rept-stat-iptps
output?
No
Perform the Removing an IPGWx
Signaling Link" procedure in this
chapter to remove all but one of the
signaling links from this linkset
Perform the Configuring an
IPGWx Linkset" procedure in
this chapter to add a new
IPGWx linkset
Were two new
Yes
IPGWx linksets created
on this sheet?
To
Sheet 1
IETF M3UA and SUA Configuration Procedures
with this parameter:
:lsn=<LSN shown in the
rept-stat-iptps output>
Does the linkset
No
being changed have
more than one signaling
link?
Yes
Do you wish
to continue to change
this linkset?
Yes
Is the desired
mate linkset shown in
the rept-stat-iptps
output?
Perform the Configuring an
IPGWx Linkset" procedure in
this chapter to add the new
mate linkset
No
To
Sheet 4
Yes
To
Sheet 3
No
313