Tekelec IP7 Secure Gateway Administration Manual page 584

Database Administration Manual - IP7 Secure
Gateway
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
ASNAMES
as2
IP Appl Sock table is (4 of 4000) 1% full
Assoc Buffer Space Used (16 KB of 800 KB) on LOC = 1203
Repeat this step for each association name displayed in
Note: If the open parameter value for all the associations assigned to the application server is no
(shown in Step
4. Change the value of the open parameter to no by specifying the chg-assoc command with the
open=no parameter. For this example, enter this command.
chg-assoc:aname=assoc1:open=no
When this command has successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
CHG-ASSOC: MASP A - COMPLTD;
CAUTION: The IP connections using the associations specified in this step will not
be able to carry any traffic when the open parameter is changed to no.
Repeat this step for all the associations assigned to the application server that have the open=yes
parameter value.
5. Change the routing key information to the database by entering the chg-appl-rtkey command
with the current and new routing context values. For this example, enter this command.
chg-appl-rtkey:nrcontext=5280:rcontext=310
When this command has successfully completed, the following message should appear.
rlghncxa03w 06-10-28 21:16:37 GMT EAGLE5 36.0.0
CHG-APPL-RTKEY: MASP A - COMPLTD
6. Display the new routing key information in the database by entering the rtrv-appl-rtkey
command with the new routing context value specified in
For this example, enter this command.
rtrv-appl-rtkey:rcontext=5280:display=all
This is an example of the possible output.
rlghncxa03w 08-04-28 21:15:37 GMT EAGLE5 38.0.0
RCONTEXT DPCI
5280
ADPTR TYPE
SUA FULL
ANAMES
910-6278-001 Revision A, January 2012
---
1030 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
YES ALW
3), continue the procedure with
SI SSN OPCI
6-006-6 5 ---
ASNAME
as2
IETF M3UA and SUA Configuration Procedures
1030
2 BUFSIZE
120 RMAX
3000 UAPS
YES RTXTHR
Step 2.
Step 5.
Step 5
and the display=all parameter.
CICS
1-002-3 75
16
800
10
10000
CICE
100
584