Tekelec IP7 Secure Gateway Administration Manual page 962

Database Administration Manual - IP7 Secure
Gateway
These messages should appear; the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change the other attributes of the IPSG association, perform one of these procedures.
bufsize -
Other attributes of the IPSG Association -
If you do not wish to change the other attributes of the IPSG association, this procedure is finished.
910-6278-001 Revision A, January 2012
Changing the Buffer Size of an IPSG Association
IPSG M2PA and M3UA Configuration Procedures
Changing the Attributes of an IPSG Association
962