Database Administration Manual - IP7 Secure
Gateway
Sheet 1 of 4
From
Sheet 1
Notes:
1. If the rtrv-ctrl-feat output shows only the HC -MIM SLK Capacity
feature with a quantity of 64, the answer to this question is no and the
Eagle 5 ISS's serial number must be verified. This is the default entry
for the rtrv-ctrl-feat output. This entry is shown whether or not the
Eagle 5 ISS's serial number is in the database.
2. If the serial number is locked, it cannot be changed.
3. If the serial number is not locked, the controlled feature cannot be
enabled.
4. The serial number can be found on a label affixed to the control
shelf (shelf 1100).
Sheet 2 of 4
910-6278-001 Revision A, January 2012
Are any controlled
Yes
features shown in the
rtrv-ctrl-feat output?
(See Note 1)
No
Enter the rtrv-serial-num
command
Is the EAGLE
5 ISS's serial number in
Yes
the database correct and is
the serial number locked?
(See Notes 2, 3,
and 4)
No
To
Sheet 3
IPSG M2PA and M3UA Configuration Procedures
To
Sheet 4
806
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers