Tekelec IP7 Secure Gateway Administration Manual page 924

Database Administration Manual - IP7 Secure
Gateway
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 6400 KB) on LOC = 1205
rtrv-assoc:aname=assoc1
This is an example of the possible output.
rlghncxa03w 09-05-28 21:14:37 GMT EAGLE5 41.0.0
ANAME assoc1
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
LSN
ipsgm3ua1
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (200 KB of 6400 KB) on LOC = 1201
Continue the procedure by performing one of these actions.
If the cwmin parameter will be be specified in this procedure, continue the procedure with
5.
5. To change the cwmin value, the new cwmin parameter value must be less than or equal to the
bufsize parameter value.
The cwmin parameter is the number if bytes specified for the association's congestion window.
The bufsize is the number of kilobytes specified for the size of the association's buffer. To
determine whether or not the cwmin value is less than or equal to the bufsize value, perform
one of these actions.
Multiply the bufsize value by 1024.
Divide the cwmin value by 1024.
Continue the procedure by performing one of these actions.
If the new cwmin value is less than or equal to the bufsize value, continue the procedure with
by performing one of these actions.
If the m2patset parameter will be specified for an M2PA association, continue the procedure
Step
with
If the uaps parameter will be specified for an M3UA association, continue the procedure
with Step
If the rhost parameter will be specified for the association, continue the procedure with
Step 8.
If the m2patset, uaps, or rhost parameter will not be specified for the association, continue
the procedure with
910-6278-001 Revision A, January 2012
1201 IPLNK PORT A
M3UA VER
m3ua1
---
remote1
---
2000 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
NO ALW
6.
7.
Step 10.
IPSG M2PA and M3UA Configuration Procedures
LINK
M3UA RFC
1030
2 BUFSIZE
120 RMAX
3000 UAPS
NO RTXTHR
A
200
800
10
0
Step
924