Figure 72: Configuring Sctp Retransmission Control For A M3Ua Or Sua Association - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
pass:loc=<card location specified with the
ping command>
:cmd="assocrtt <name of the association
specified with the ping command>"
command to display the round trip time data
collected after an association is established when
an SCTP INIT message is sent and an
acknowlegement is received.
Perform this command for each association name
that references the remote host name specified in
the ping command.
Enter the pass:loc=<card location specified in
the previous step>:cmd="sctp -a <association
name>" command.
The association name is the association name
specified in the previous step.
Do the retransmission
parameter values need to
This procedure is
Sheet 2 of 2

Figure 72: Configuring SCTP Retransmission Control for a M3UA or SUA Association

910-6278-001 Revision A, January 2012
From
Sheet 1
Enter the
Yes
be changed?
No
finished
IETF M3UA and SUA Configuration Procedures
Perform the "Changing the Attributes of
an M3UA or SUA Association" procedure
in this chapter and change the
retransmission parameters based on the
results of the assocrtt (Weighted
Average round-trip time) and sctp -a
(data retransmission counts) pass
command outputs
565