Changing The Host Values Of An Ipsg Association - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway

Changing the Host Values of an IPSG Association

This procedure is used to change the host values of an IPSG association, assigned to E5-ENET cards
that are running the IPSG application, IPSG cards, using the chg-assoc command.
If you wish to change the host values of M2PA associations assigned to cards that are running the
IPLIM or IPLIMI applications, perform the
If you wish to change the host values of M3UA associations assigned to cards that are running the
SS7IPGW or IPGWI applications, perform the
procedure.
These parameters of the chg-assoc command are used in this procedure:
:aname – The name assigned to the association, shown in the rtrv-assoc output.
:lhost – The host name for the local host, shown in the rtrv-ip-host output.
:lport – The SCTP port number for the local host.
:alhost – The alternate local host name, shown in the rtrv-ip-host output.
:adapter – The adapter layer for this association, m2pa or m3ua .
:open – The connection state for this association. Valid values are yes or no. When the open=yes
parameter is specified, the connection manager opens the association if the association is operational.
When the open=no parameter is specified, the connection manager will not open the association. If
the open=no parameter is specified for an established IPSG M3UA association, and the UA Graceful
Shutdown option is enabled (refer to
M3UA connection will be gracefully shutdown.
:m2patset – The M2PA timer set assigned to the association. The m2patset parameter can be
specified only with the adapter=m2pa parameter, or if the association already has the adapter=m2pa
parameter assigned and the adapter parameter value is not being changed. If the adapter parameter
value is being changed to m2pa, and the m2patset parameter is not specified, the default value for
the m2patset parameter (1 - M2PA timer set 1) is assigned to the association. If the adapter parameter
value for the association is m2pa, is not being changed, and the m2patset parameter is not specified
with the chg-assoc command, the m2patset parameter value is not changed.
:ver – The M2PA version assigned to the M2PA association, either the RFC version (ver=rfc), or
the Draft 6 version (ver=d6). The ver parameter can be specified only if, when this procedure is
completed, the adapter parameter value is m2pa. If the adapter parameter value is being changed
to m2pa, and the ver parameter is not specified, the default M2PA version of RFC is assigned to the
association. To change the ver parameter value, the open parameter value for the association must
be no.
:uaps – The UA parameter set value being assigned to an M2PA or an M3UA association.
The chg-assoc command contains other parameters that are not used in this procedure. To change
these parameters, perform these procedures.
bufsize - Changing the Buffer Size of an IPSG Association
Other attributes of the IPSG association -
At least one optional parameter must be specified.
The command input is limited to 150 characters, including the hostnames.
910-6278-001 Revision A, January 2012
IPSG M2PA and M3UA Configuration Procedures
Changing the Host Values of a M2PA Association
Changing the Host Values of a M3UA or SUA Association
Changing a UA Parameter Set
Changing the Attributes of an IPSG Association
for more information), the IPSG
procedure.
950