Figure 113: Configuring Ip Options - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Enter the rtrv-sg-opts
command
Is the srkq
parameter value being
changed?

Figure 113: Configuring IP Options

910-6278-001 Revision A, January 2012
Yes
Enter the rtrv-tbl-capacity
command
No
The new srkq parameter value cannot
be less than the number of rounting
keys that are currently provisioned. This
is shown in the RTEKEY row of the
rtrv-tbl-capacity command.
Enter the chg-sg-opts command with at least one
of these parameters:
:srkq = <0 - 2500>
:snmpcont = <SNMP system contact>
:getcomm = <SNMP get community name>
:setcomm = <SNMP set community name>
:trapcomm = <SNMP trap community name>
:ipgwabate = <yes, no>
:uameasusedftas = <yes, no>
Note: The values of the snmpcont, getcomm,
setcomm, and trapcomm parameters are a string
of up to 32 characters that is not case sensitive. If
the character string contains characters other than
alphanumeric characters, the character string
must be enclosed in single quotes.
Enter the rtrv-sg-opts
command
Enter the
chg-db:action=backup:dest=fixed
command
IPSG M2PA and M3UA Configuration Procedures
872