Database Administration Manual - IP7 Secure
Gateway
Removing an IP Host Assigned to an IPSG Card
This procedure removes an IP host that is assigned to an IPSG card using the dlt-ip-host command.
The dlt-ip-host command uses the following parameter.
:host – Hostname. The hostname to be removed. This parameter identifies the logical name assigned
to a device with an IP address.
No associations can reference the host name being removed in this procedure.
The associations referencing the host name can be removed by performing the
Association
procedure or the host name in these associations can be changed by performing the
the Host Values of an IPSG Association
in the rtrv-assoc outputs.
1. Display the current IP host information in the database by entering the
rtrv-ip-host:display=all command.
The following is an example of the possible output.
rlghncxa03w 08-12-28 21:17:37 GMT EAGLE5 40.0.0
LOCAL IPADDR
192.1.1.10
192.1.1.12
192.1.1.14
192.1.1.20
192.1.1.22
192.1.1.24
192.1.1.30
192.1.1.32
192.1.1.50
192.1.1.52
192.3.3.33
REMOTE IPADDR
150.1.1.5
IP Host table is (12 of 2048) 1% full
If the IP host that is being removed is a remote host, continue the procedure with
If the IP host that is being removed is a local host, continue the procedure with
2. Display the current link parameters associated with the IP card in the database by entering the
rtrv-ip-lnk command. The following is an example of the possible output.
rlghncxa03w 08-12-28 21:14:37 GMT EAGLE5 40.0.0
LOC
PORT IPADDR
1303
A
192.1.1.10
1303
B
--------------- --------------- HALF
1305
A
192.1.1.12
1305
B
--------------- --------------- HALF
1313
A
192.1.1.14
1313
B
--------------- --------------- HALF
2101
A
192.1.1.20
2101
B
--------------- --------------- HALF
2103
A
192.1.1.22
910-6278-001 Revision A, January 2012
procedure. The host name assigned to associations is displayed
LOCAL HOST
IPNODE1-1201
IPNODE1-1203
IPNODE1-1205
IPNODE2-1201
IPNODE2-1203
IPNODE2-1205
KC-HLR1
KC-HLR2
DN-MSC1
DN-MSC2
GW100. NC. TEKELEC. COM
REMOTE HOST
NCDEPTECONOMIC_DEVELOPMENT. SOUTHEASTERN_COORIDOR_ASHVL. GOV
SUBMASK
255.255.255.128 HALF
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
IPSG M2PA and M3UA Configuration Procedures
DUPLEX
SPEED MACTYPE AUTO MCAST
10
10
----
---
10
FULL
100
10
FULL
100
10
FULL
100
Removing an IPSG
Changing
Step
5.
Step
2.
802.3
NO
NO
DIX
NO
NO
DIX
YES
NO
DIX
NO
NO
DIX
NO
NO
DIX
NO
NO
DIX
NO
NO
DIX
NO
NO
DIX
NO
NO
826
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers