Tekelec IP7 Secure Gateway Administration Manual page 940

Database Administration Manual - IP7 Secure
Gateway
RTIMES
OPEN
RHOSTVAL RELAXED
LSN
ipsgm3ua1
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (400 KB of 6400 KB) on LOC = 1201
5. If the bufsize parameter value causes the total buffer size for all the associations on the IPSG
card to exceed the maximum buffer size for that IPSG card, the chg-assoc command will be
rejected.
If you wish to increase the buffer size for this association to a value that is greater than available
buffer size for the card, the buffer size of the other associations assigned to the card must be
decreased. Perform this step,
If the buffers on the other associations assigned to the card do not need to be changed, continue
the procedure with
Display the associations assigned to the IP card (and its corresponding local host) by entering the
rtrv-assoc command with the local host name assigned to the association being changed. For
this example, enter these commands.
rtrv-assoc:lhost=IPNODE2-1205
This is an example of the possible output.
rlghncxa03w 06-10-28 21:14:37 GMT EAGLE5 36.0.0
ANAME
assoc2
assoc3
assoc5
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (800 KB of 6400 KB) on LOC = 1205
rtrv-assoc:lhost=m3ua1
This is an example of the possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
ANAME
swbel32
assoc1
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (400 KB of 6400 KB) on LOC = 1201
6. Display each association shown in
of each association shown in
For this example, enter these commands.
rtrv-assoc:aname=assoc2
910-6278-001 Revision A, January 2012
10 CWMIN
NO ALW
Step 6, Step
Step 9.
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1205 A A M2PA
1205 A B2 M2PA
1205 A A3 M2PA
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1201 A A M3UA
1201 A A M3UA
Step 5
Step 5.
IPSG M2PA and M3UA Configuration Procedures
3000
YES
7, and Step 8.
2048 2048
3000 3000
1500 3000
1030 2345
2000 1030
by entering the rtrv-assoc command with the name
UAPS 10
RTXTHR 0
YES YES
YES YES
YES YES
YES YES
YES YES
940