Tekelec IP7 Secure Gateway Administration Manual page 394

Database Administration Manual - IP7 Secure
Gateway
OPEN
RHOSTVAL RELAXED
ASNAMES
as2
IP Appl Sock table is (6 of 4000) 1% full
Assoc Buffer Space Used (16 KB of 800 KB) on LOC = 1311
If the desired association is shown in the rtrv-assoc output, see
to the association and the new application server, continue the procedure with
If the desired association is not shown in the rtrv-assoc output, perform the
Association to a New Application Server
server.
4. Enter the rtrv-card command with the location of the card, from the rtrv-assoc output in
3, that contains the association that will be assigned to the application server. For this example,
enter this command.
rtrv-card:loc=1201
This is an example of possible output.
rlghncxa03w 08-03-06 15:17:20 EST EAGLE5 38.0.0
CARD TYPE
1201 DCM
If the application assigned to the card is SS7IPGW or IPGWI, shown in the APPL column, continue
the procedure with
If the application assigned to the card is IPSG, the association assigned to this card cannot be
assigned to the application server. Repeat this procedure from
5. Display the associations assigned to the local IP host value specified in
the rtrv-assoc command with the lhost parameter.
For this example, enter this command.
rtrv-assoc:lhost=gw102.nc.tekelec.com
This is an example of the possible output.
rlghncxa03w 06-10-28 21:14:37 GMT EAGLE5 36.0.0
ANAME
assoc1
IP Appl Sock/Assoc table is (5 of 4000) 1% full
Assoc Buffer Space Used (16 KB of 3200 KB) on LOC = 1305
6. Display the application servers that the associations shown in
rtrv-as command with the names of the associations shown in
For this example, enter this command.
rtrv-as:aname=assoc1
This is an example of the possible output.
rlghncxa03w 06-10-28 21:14:37 GMT EAGLE5 36.0.0
AS Name
910-6278-001 Revision A, January 2012
YES ALW
procedure to add a new association to a new application
APPL LSET NAME
SS7IPGW lsn1
Step 5.
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1305 A A SUA
Mode Tr ms
IETF M3UA and SUA Configuration Procedures
YES RTXTHR
Step 8
LINK SLC LSET NAME
A 0
Step 3 and choose another association.
4000 1030 YES
Step 5 are assigned to by entering
Step
Association Names
10000
for the rules that apply
Step 4.
Adding a New
Step
LINK SLC
Step 2 or Step 3 by entering
YES
5.
394