Tekelec IP7 Secure Gateway Administration Manual page 788

Database Administration Manual - IP7 Secure
Gateway
Enter the
rtrv-tbl-capacity
command.
exceed the maximum number of
signaling links the EAGLE
From
Sheets 2
or 6
Enter the
rtrv-card
command.
An IPSG card can
contain a maximum
of 32 IPSG signaling
links. Choose
another IPSG card.
A new signaling
link cannot be
added to this
card. Choose
another IPSG
card.
Sheet 1 of 7
910-6278-001 Revision A, January 2012
Will the addition
of the signaling link
Yes
5 ISS can have?
No
Perform the "Enabling the
Large System # Links
Enter the Controlled Feature"
rtrv-slk command. procedure to enable the
desired quantity of signaling
Is the
required card in the
database? See
the Note.
Yes
Enter the
rtrv-slk command with this
parameter.
:loc=<IPSG card location>
How many
32
signaling links are
assigned to the
card?
Less than
32
Less than
How many
5000
TPS is currently
shown in the rtrv-slk
output?
IPSG M2PA and M3UA Configuration Procedures
What is the
maximum number of signaling
links the EAGLE 5 ISS can
have?
Less
than
2800
links.
Perform the Adding an
No
IPSG Card" procedure to
add the IPSG card to the
database.
Note: The card type must be
ENET and card's application
must be IPSG.
5000
2800
This procedure
cannot be
performed. The
EAGLE 5 ISS can
contain a maximum
of 2800 signaling
links.
To
Sheet 2
788