Tekelec IP7 Secure Gateway Administration Manual page 576

Database Administration Manual - IP7 Secure
Gateway
If the routing key being changed does not contain a routing context value, specify the DPC, SI, and
TYPE values shown in the rtrv-appl-rtkey output in
The service indicator value for the routing key to be used in this procedure is either 4, 5, or 13.
For this example, enter these commands.
rtrv-appl-rtkey:dpc=123-234-123:si=5:type=full:display=all
This is an example of the possible output.
rlghncxa03w 08-04-28 21:16:37 GMT EAGLE5 38.0.0
RCONTEXT DPC
--------- 123-234-123
ADPTR TYPE
M3UA FULL
ANAMES
assoc20
STATIC Route Key table is (17 of 2000) 1% full
STATIC Route Key Socket Association table is (17 of 32000) 1% full
rtrv-appl-rtkey:rcontext=225:display=all
This is an example of the possible output.
rlghncxa03w 06-10-28 21:16:37 GMT EAGLE5 36.0.0
RCONTEXT DPCI
225
ADPTR TYPE
M3UA FULL
ANAMES
assoc15
STATIC Route Key table is (17 of 2000) 1% full
STATIC Route Key Socket Association table is (17 of 32000) 1% full
3. Change the CIC values of the routing key by entering the chg-appl-rtkey command.
The parameters required for the chg-appl-rtkey command are determined by the type of change
being made to the routing key. Go to one of these sections to determine the required parameter
combination.
Rules for Changing the Range of CIC Values in an Existing Routing Key
Rules for Splitting the Range of CIC Values in an Existing Routing Key
To change the range of CIC values for this example, enter these commands.
chg-appl-rtkey:dpca=123-234-123:si=5:opca=122-124-125:cics=1:cice=1000:ncice=2000
chg-appl-rtkey:dpci=4-035-7:si=5:opci=2-007-3:cics=2000:cice=3000:ncice=4000
If a routing context value is assigned to the routing key, the rcontext parameter and value
assigned to the routing key can be used to identify the routing key being changed instead of the
dpc, si, opc, cics, and cice parameters. If the rcontext parameter is specified only one of
these parameters, ncics or ncice, can be specified with the chg-appl-rtkey parameter.
For this example, enter this command.
910-6278-001 Revision A, January 2012
SI SSN OPC
5 --- 122-124-125
ASNAME
as12
SI SSN OPCI
4-035-7 5 ---
ASNAME
as7
IETF M3UA and SUA Configuration Procedures
Step 1 for the routing key being changed.
CICS
1
CICS
2-007-3 2000
CICE
1000
CICE
3000
576