Tekelec IP7 Secure Gateway Administration Manual page 547

Database Administration Manual - IP7 Secure
Gateway
as6
AS Table is (6 of 250) 1% full
rtrv-as:aname=assoc3
This is an example of the possible output.
rlghncxa03w 08-04-28 21:14:37 GMT EAGLE5 38.0.0
AS Name
as2
as3
as5
AS Table is (6 of 250) 2% full
rtrv-as:aname=assoc5
This is an example of the possible output.
rlghncxa03w 08-04-28 21:14:37 GMT EAGLE5 38.0.0
AS Name
as2
as3
as5
AS Table is (6 of 250) 2% full
The maximum number of SCTP association to application server assignments that can be hosted
by an IPGWx card (referenced by the lhost parameter of the association) is 50.
If the number of SCTP association to application server assignments (shown in this step) is less
than 50, continue the procedure by performing one of these steps.
If the rept-stat-card command was not performed in
Step 10.
If the rept-stat-card command was performed in
changed, continue the procedure with
If the rept-stat-card command was performed in
continue the procedure with
If the number of SCTP association to application server assignments (shown in this step) is 50, the
local host value cannot be used in this procedure. Repeat
link and IP.
10. Display the application running on the IP card shown in
command specifying the location of the IP card.
For this example, enter this command.
rept-stat-card:loc=1205
This is an example of the possible output.
rlghncxa03w 08-04-27 17:00:36 GMT EAGLE5 38.0.0
CARD VERSION
910-6278-001 Revision A, January 2012
LOADSHARE 2000
Mode Tr ms
LOADSHARE 2000
LOADSHARE 2000
LOADSHARE 2000
Mode Tr ms
LOADSHARE 2000
LOADSHARE 2000
LOADSHARE 2000
Step
Step 11.
TYPE GPL
IETF M3UA and SUA Configuration Procedures
assoc2
Association Names
assoc3
assoc3
assoc3
Association Names
assoc5
assoc5
assoc5
Step 7, continue the procedure with
Step 7, and the link value will not be
12.
Step 7, and the link value will be changed,
Step 5 and
Step 6 using the rept-stat-card
PST SST
Step 6 and select another IP
AST
547