Tekelec IP7 Secure Gateway Administration Manual page 938

Database Administration Manual - IP7 Secure
Gateway
Enter the canc-cmd without the trm parameter at the terminal where the rtrv-assoc command
was entered.
Enter the canc-cmd:trm=<xx>, where <xx> is the terminal where the rtrv-assoc command
was entered, from another terminal other that the terminal where the rtrv-assoc command was
entered. To enter the canc-cmd:trm=<xx> command, the terminal must allow Security
Administration commands to be entered from it and the user must be allowed to enter Security
Administration commands. The terminal's permissions can be verified with the rtrv-secu-trm
command. The user's permissions can be verified with the rtrv-user or rtrv-secu-user
commands.
For more information about the canc-cmd command, go to the Commands Manual.
1. Display the associations in the database using the rtrv-assoc command.
This is an example of possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
ANAME
swbel32
a2
a3
assoc1
assoc2
assoc3
assoc5
2. Enter the rtrv-card command with the location of the card that is hosting the association that
will be changed in this procedure. For this example, enter this command.
rtrv-card:loc=1205
This is an example of possible output.
rlghncxa03w 08-04-06 15:17:20 EST EAGLE5 38.0.0
CARD TYPE
1205 ENET
rtrv-card:loc=1201
This is an example of possible output.
rlghncxa03w 08-04-06 15:17:20 EST EAGLE5 38.0.0
CARD TYPE
1201 ENET
If the application assigned to the card is IPSG, shown in the APPL column, continue the procedure
by performing one of these steps.
If the open parameter value for the association being changed is yes, continue the procedure
with Step 3.
If the open parameter value for the association being changed is no, continue the procedure
with Step 4.
If the application assigned to the card is IPLIM or IPLIMI, perform the
M2PA Association
910-6278-001 Revision A, January 2012
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1201 A A M3UA
1305 A A SUA
1307 A A SUA
1201 A A M3UA
1205 A A M2PA
1205 A B2 M2PA
1205 A A3 M2PA
APPL LSET NAME
IPSG e5e6a
e5e6a
APPL LSET NAME
IPSG ipsgm3ua1
procedure.
IPSG M2PA and M3UA Configuration Procedures
1030 2345 YES
1030 2345 YES
1030 2346 YES
2000 1030 YES
2048 2048 YES
3000 3000 YES
1500 3000 YES
LINK SLC LSET NAME
A 0 e5e6a
A3 2
LINK SLC LSET NAME
A 0
YES
YES
YES
YES
YES
YES
YES
LINK SLC
B2 1
LINK SLC
Changing the Buffer Size of a
938