Tekelec IP7 Secure Gateway Administration Manual page 583

Database Administration Manual - IP7 Secure
Gateway
----------
----------
300
RCONTEXT
----------
STATIC Route Key table is (17 of 2000) 1% full
STATIC Route Key Socket Association table is (17 of 32000) 1% full
2. Display the specific routing key information for the routing key being changed by entering the
rtrv-appl-rtkey command with the display=all parameter and the RCONTEXT value shown
in the rtrv-appl-rtkey output in
enter this command.
rtrv-appl-rtkey:rcontext=310:display=all
This is an example of the possible output.
rlghncxa03w 08-04-28 21:16:37 GMT EAGLE5 38.0.0
RCONTEXT DPCI
310
ADPTR TYPE
SUA FULL
ANAMES
assoc1
STATIC Route Key table is (17 of 2000) 1% full
STATIC Route Key Socket Association table is (17 of 32000) 1% full
If the routing context value shown for the routing key is dashes (-), this routing key cannot be used
in this procedure. The dashes show that the routing key does not have a routing context assigned
to it.
To assign a routing context value to a M3UA routing key that does not have a routing context
value, the routing key must be removed by performing the
Application Server
the Adding a Routing Key Containing an Application Server
routing context value to this routing key, but you wish to change the routing context value in
another routing key, repeat this step with another routing key shown in
to assign a routing context value to this routing key, and do not wish to change the routing context
value in another routing key, this procedure cannot be performed.
If the routing key contains a routing context value, continue the procedure with
3. Display the association displayed in the rtrv-appl-rtkey output in
command with the association name shown in
rtrv-assoc:aname=assoc1
This is an example of possible output.
rlghncxa03w 09-05-28 09:12:36 GMT EAGLE5 41.0.0
ANAME assoc1
LOC
ADAPTER
LHOST
ALHOST
RHOST
910-6278-001 Revision A, January 2012
6-024-7 5 M3UA
6-024-7 5 M3UA
7-008-7 6 SUA
DPC SI ADPTR
*********** ** M3UA
Step 1
SI SSN OPCI
6-006-6 5 ---
ASNAME
as2
procedure. Re-enter the routing key with the routing context value by performing
1203 IPLNK PORT
SUA VER
gw105.nc.tekelec.com
---
gw100.nc.tekelec.com
IETF M3UA and SUA Configuration Procedures
as4
as4
as6
ASNAME
as11
for the routing key being changed. For this example,
CICS
1-002-3 75
Removing a Routing Key Containing an
procedure. If you do not wish to assign a
Step 2.
A LINK
SUA RFC
FULL
FULL
FULL
TYPE
DEFAULT
CICE
100
Step 1. If you do not wish
Step 3.
Step 2, using the rtrv-assoc
A
583