Tekelec IP7 Secure Gateway Administration Manual page 726

Database Administration Manual - IP7 Secure
Gateway
1. Display the IP routes in the database with the rtrv-ip-rte command.
This is an example of the possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
LOC DEST
1301 128.252.10.5
1301 128.252.0.0
1301 150.10.1.1
1303 192.168.10.1
1303 192.168.0.0
IP Route table is
2. Display the IP cards in the database with the rtrv-ip-card command.
This is an example of the possible output.
rlghncxa03w 08-08-28 21:17:37 GMT EAGLE5 39.0.0
LOC 1212
SRCHORDR
DNSA
DNSB
DEFROUTER 150.1.1.100
DOMAIN
SCTPCSUM
BPIPADDR
BPSUBMASK ---------------
LOC 1301
SRCHORDR
DNSA
DNSB
DEFROUTER ---------------
DOMAIN
SCTPCSUM
BPIPADDR
BPSUBMASK ---------------
LOC 1303
SRCHORDR
DNSA
DNSB
DEFROUTER 150.190.15.25
DOMAIN
SCTPCSUM
BPIPADDR
BPSUBMASK ---------------
If the required IP card is not shown in the rtrv-ip-card output, perform the
Card procedure to add the card to the database.
Perform the Configuring an IP Link
addresses assigned for the A or B interfaces of the IP card is the same as the network portion of
the IP address that will be assigned to the gtwy parameter of the IP route
Note: If a Class A or C IP address (see
for the dest parameter in
3. The subnet address that results from the dest and submask parameter values of the ent-ip-rte
command cannot be the same as the subnet address that results from the pvn and pvnmask , fcna
and fcnamask, or fcnb and fcnbmask parameter values of the chg-netopts command.
910-6278-001 Revision A, January 2012
SUBMASK
255.255.255.255
255.255.0.0
255.255.255.255
255.255.255.255
255.255.255.0
(5 of 1024) 1% full
LOCAL
150.1.1.1
---------------
NC. TEKELEC. COM
crc32c
---------------
SRVRONLY
140.188.13.10
140.190.15.28
NC. TEKELEC. COM
crc32c
---------------
LOCAL
150.190.15.1
---------------
NC. TEKELEC. COM
crc32c
---------------
procedure and make sure that the network portion of the IP
Table 51: Valid Subnet Mask Parameter
Step 4, continue the procedure with
IPSG M2PA and M3UA Configuration Procedures
GTWY
140.188.13.33
140.188.13.34
140.190.15.3
150.190.15.23
150.190.15.24
Step 4.
Adding an IPSG
Values) will be specified
726