Figure 111: Removing A Network Appearance - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
These messages should appear; the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Enter the
rtrv-na command
Is a specific group
code associated with an
ITU-N or ITU-N Spare network
appearance to be
removed?
Enter the
dlt-na command with these
parameters:
:na=<network appearance from
rtrv-na command>
:type = <ansi, itui, itun, itun24, ituis,
ituns>

Figure 111: Removing a Network Appearance

910-6278-001 Revision A, January 2012
Yes
No
dlt-na command with these
:na = <ITU-N or ITU-N spare network
appearance from rtrv-na command>
:gc = <group code assigned to
ITU-N or ITU-N Spare network
Enter the
rtrv-na command
Enter the
chg-db:action=backup:dest=fixed
command
IPSG M2PA and M3UA Configuration Procedures
Enter the
parameters:
:type = <itun, ituns>
appearance>
857