Table of Contents
Advertisement
JunosE 11.2.x BGP and MPLS Configuration Guide
Meaning
618
Statistics:
In Octets:
0
In Frames:
0
In Discards:
0
In Errors:
0
Out Octets:
0
Out Frames:
0
Out Discards: 40
Out Errors:
0
Time since counters last reset: 01:04:10
To display a summary of all interfaces configured for the specified VPLS instance:
host1#show bridge vplsB interface brief
Interface
-------------------------
FastEthernet1/1.1
ATM10/1.1.1
vpls vplsB
Table 120 on page 618 lists the show bridge interface command output fields.
Table 120: show bridge interface Output Fields
Field Name
BridgeGroup
Port Number
Operational Status
Admin Status
Snmp Link Status Trap
Max Learn
Subscriber Policy
Statistics
In Octets
In Frames
In Discards
In Errors
Out Octets
Port
Status
------
------------
1
Up
2
Up
3
Up
Field Description
Name of the VPLS instance to which the interface belongs
Port number on which this interface resides
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
State of the physical interface: Up, Down
Whether SNMP link status processing is enabled or disabled for the
specified interface
Maximum number of dynamic MAC addresses that the interface
can learn
Name of the subscriber policy currently in effect for the interface
Displays statistics information for the specified port
Number of octets received on this interface
Number of frames received on this interface
Number of incoming packets discarded on this interface
Number of incoming errors received on this interface
Number of octets transmitted on this interface
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
