JunosE 11.2.x Command Reference Guide A to M
aaa accounting interval
Syntax
Release Information
Description
Options
Mode
28
aaa accounting interval period
no aaa accounting interval
Command introduced before JunosE Release 7.1.0.
Specifies the default accounting interval used for all users and services. The no version
sets the value to 0, which turns off interim accounting.
NOTE: This command is deprecated and might be removed completely in a future
release. Use the aaa service accounting interval and aaa user accounting interval
commands to configure default accounting intervals for services and users.
period—Accounting interval in minutes in the range 10–1440, which sets the time period
between accounting updates
Global Configuration
Copyright © 2010, Juniper Networks, Inc.