Aaa Accounting Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa accounting interval

Syntax
Release Information
Description
Options
Mode
28
aaa accounting interval period
no aaa accounting interval
Command introduced before JunosE Release 7.1.0.
Specifies the default accounting interval used for all users and services. The no version
sets the value to 0, which turns off interim accounting.
NOTE: This command is deprecated and might be removed completely in a
future release. Use the aaa service accounting interval and aaa user
accounting interval commands to configure default accounting intervals for
services and users.
period—Accounting interval in minutes in the range 10–1440, which sets the time period
between accounting updates
Global Configuration
Copyright © 2010, Juniper Networks, Inc.