Clear Bridge Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
clear bridge address
Syntax
Release Information
Description
Options
Mode
Related Topics
368
clear bridge { bridgeGroupName | vplsName } address macAddress
Command introduced in JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Removes a specific dynamic (learned) MAC address entry from the forwarding table for
the specified bridge group or VPLS instance. There is no no version.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
macAddress—Unique 48-bit (6-byte) number that is programmed into each LAN
network interface card (NIC) at the time of manufacture; also known as a hardware
address or physical address. The MAC address format is a dotted triple of four-digit
hexadecimal numbers; for example, 0090.1a40.4c7c
Privileged Exec
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JunosE BGP
and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers