Broadcast - Juniper JUNOS OS 10.3 - SOFTWARE Manual

broadcast

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
broadcast address <key key-number> <version value> <ttl value>;
[edit system ntp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the local router or switch to operate in broadcast mode with the remote system
at the specified . In this mode, the local router or switch sends periodic broadcast
address
messages to a client population at the specified broadcast or multicast
you include this statement only when the local router or switch is operating as a
transmitter.
—The broadcast address on one of the local networks or a multicast address
address
assigned to NTP. You must specify an address, not a hostname. If the multicast
address is used, it must be
—(Optional) All packets sent to the address include authentication fields
key key-number
that are encrypted using the specified key number.
Range: Any unsigned 32-bit integer
ttl value —(Optional) Time-to-live (TTL) value to use.
Range: 1 through 255
Default: 1
—(Optional) Specify the version number to be used in outgoing NTP packets.
version value
Range: 1 through 4
Default: 4
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the NTP Time Server and Time Services
Chapter 16: Configuration Statements for System Setup
.
224.0.1.1
address . Normally,
201