Configuring The Firewall Filter For Vpls Family Type (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring the Firewall Filter for VPLS Family Type (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
You can configure firewall filters to filter virtual private LAN service (VPLS) packets.
To configure the vpls firewall filter in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Firewall > Family >
3.
VPLS.
Add or modify settings as specified in Table 88 on page 180.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 15: Configuring Firewall
179