Baseline Bridge - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline bridge

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
baseline bridge { bridgeGroupName | vplsName }
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Sets a statistics baseline for a bridge group or VPLS instance. The router implements the
baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is no
no version.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Privileged Exec
Setting a Baseline for VPLS Statistics in the JunosE BGP and MPLS Configuration Guide
Chapter 3: B Commands
217