baseline bridge
baseline bridge { bridgeGroupName | vplsName }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
vplsName variable added in JUNOSe Release 7.1.0.
Sets a statistics baseline for a bridge group or VPLS instance. The router implements
Description
the baseline by reading and storing the statistics at the time the baseline is set and
then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
Options
Privileged Exec
Mode
Related Topics
bridgeGroupName Name of a bridge group specified with the bridge command
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Setting a Baseline for VPLS Statistics in the JUNOSe BGP and MPLS Configuration
Guide
Chapter 3: B Commands
219
baseline bridge
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers