Bgp Default Local-Preference - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
bgp default local-preference
Syntax
Release Information
Description
Options
Mode
284
bgp default local-preference value
no bgp default local-preference [ value ]
Command introduced before JunosE Release 7.1.0.
Changes the default local preference value. Generally, the default value of 100 allows
you to easily define a particular path as less preferable than paths with no local preference
attribute. The preference is sent to all routers in the local AS. The preferred path is the
one with the highest preference value. The no version restores the default setting.
value—Local preference number in the range 0–4294967295
Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
