Bgp Default Local-Preference - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bgp default local-preference

Syntax
Release Information
Description
Options
Mode
284
bgp default local-preference value
no bgp default local-preference [ value ]
Command introduced before JunosE Release 7.1.0.
Changes the default local preference value. Generally, the default value of 100 allows
you to easily define a particular path as less preferable than paths with no local preference
attribute. The preference is sent to all routers in the local AS. The preferred path is the
one with the highest preference value. The no version restores the default setting.
value—Local preference number in the range 0–4294967295
Router Configuration
Copyright © 2010, Juniper Networks, Inc.