Starting And Stopping Strm Log Management; Accessing The Embedded Snmp Agent - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual

Step 4
Step 5
Starting and
Stopping STRM
Log Management
Step 1
Step 2
Accessing the
Embedded SNMP
Agent
Step 1
Step 2
Table 3-5 STRM Log Management Console Management Parameters (continued)
Parameter
Login Message File
DNS Settings
Enable DNS Lookups for
Host Identity
Data Export Settings
Include Header in CSV
Exports
Maximum Simultaneous
Exports
Click Save.
From the Administration Console menu, select Configurations > Deploy
configuration changes.
To start, stop, or restart STRM Log Management:
In the main STRM Log Management interface, click Config.
The STRM Log Management Administration Console appears.
From the System menu, select one of the following options:
STRM Start
a
STRM Stop
b
STRM Restart
c
To access the SNMP agent:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the System Management icon.
The System Management window appears.
STRM Log Management Administration Guide

Starting and Stopping STRM Log Management

Description
Specify the location and name of a file that includes
content you wish to appear on the STRM Log
Management log in window. This file may be in text or
HTML format and the contents of the file appear below
the current log in window.
Enable or disable the ability for STRM Log Management
to search for host identity information. When enabled, this
information is available using the right-mouse button
(right-click) on any IP address or asset name in the
interface. The default is True.
Specify whether you wish to include a header in a CSV
export file.
Specify the maximum number of exports you wish to
occur at one time.
35