Release Software Protocols; Core Routing Stack; Network Management Protocols; Routing Protocols - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - RELEASE NOTES 2010-11-09 Release Note

Release Software Protocols

Core Routing Stack

Network Management Protocols

Routing Protocols

Multiprotocol Label Switching (MPLS)

Layer 2 Protocols

Copyright © 2010, Juniper Networks, Inc.
The following list identifies the major software protocols supported in this release. For
detailed information about any protocol, see the configuration guides.
Internet Protocol (IP) version 4 and version 6

Transmission Control Protocol (TCP) for IPv4

User Datagram Protocol (UDP) for IPv4 and IPv6

Simple Network Management Protocol (SNMP) versions 1, 2c, and 3

Border Gateway Protocol (BGP-4)

Distance Vector Multicast Routing Protocol (DVMRP)

Internet Group Membership Protocol (IGMP)

Intermediate System–to–Intermediate System (IS-IS)

Layer 2 Virtual Private Networks (L2VPNs)

Mobile IP

Open Shortest Path First (OSPF) version 2 and version 3

Protocol Independent Multicast Protocol (PIM), including PIM dense mode, PIM

sparse mode, PIM dense-sparse mode, and PIM source-specific multicast
Routing Information Protocol (RIP) version 2

Virtual Private LAN Service (VPLS)

Virtual Router Redundancy Protocol (VRRP)

Border Gateway Protocol (BGP-4)

Label Distribution Protocol (LDP)

Resource ReSerVation Protocol – Traffic Engineering Extensions (RSVP-TE)

Asynchronous Transfer Mode (ATM)

Bridged Ethernet

Bridged IP

Cisco High-Level Data Link Control (Cisco HDLC)

Ethernet

Extensible Authentication Protocol (EAP)

Frame Relay

Layer 2 Tunneling Protocol (L2TP)

Multilink Frame Relay (MLFR)

Multilink Point-to-Point Protocol (MLPPP)

Release 11.3.0

Release Software Protocols

13